If a StarFire 3000 is used on the machine, a StarFire 3000 must be used on the implement. Use of the iGrade StarFire GNSS antenna in any other manner is neither permitted nor supported and can degrade desired performance of the paired receiver. The StarFire 3000 Receiver must remain mounted to the same implement as the iGrade antenna being utilized. ![]() The iGrade antenna is only compatible with StarFire 3000 Receivers and is only intended for use on the implement receiver utilizing iGrade or other earthmoving applications. Implement receivers in horizontal-accuracy-only applications.The iGrade antenna is only necessary for iGrade users demanding the highest possible vertical accuracy for their applications and should not be installed on the following: It is compatible with global positioning system (GPS) offering L1, L2, and L5 satellite signals and Russian satellite constellation (GLONASS) offering G1 and G2 satellite signals, as well as the StarFire network (L-band), making it an excellent enhancement to the StarFire 3000 Receiver. The iGrade antenna resists signal interference, allowing for the rejection of error that can typically be caused by multipath effects. Vertical accuracy can be impacted by signal interference that the StarFire 3000 Receiver is susceptible to, such as multipath. The iGrade StarFire GNSS antenna (iGrade antenna) facilitates enhanced performance of the implement’s StarFire 3000 Receiver when utilized for iGrade that requires maximum vertical precision. The vertical accuracy performance of the StarFire 6000 with internal antenna for iGrade applications is similar to that of the StarFire 3000 with external iGrade antenna. The StarFire 6000 Receiver is not currently compatible with external antennas. The John Deere Application Controller 1100 is required for iGrade activation. IGrade requires the receiver to have an RTK signal level. iGrade does not support WAAS, EGNOS, SF1, SF2, or SF3 signal levels. Compatible with integrated AutoTrac, AutoTrac Controller, and AutoTrac Universal.*When equipped with optional electronic SCVs.Any SCVs can be used and an option connector is not used. Compatible using John Deere proprietary SCV type.Running with John Deere legacy requires using SCVs 1 or 3 and connecting the UCC harness to the option connector at the rear of the tractor cab. Compatible using John Deere legacy SCV.Compatible using external selective control valve (SCV) and external SCV switch.Non-John Deere tractors, 60 Series and older tractors, 5XXX, 6X00, 6X10, 6X30, 7X00, 7X10, and Small- Frame 7X20/7X30 Tractors.None of the three packages is approved for use with tile plows because John Deere does not warrant use of its tractors for tiling.įor more information, visit is approved for the following platforms: Surface Water Pro and Surface Water Pro Plus can use either SF2 or RTK correction signals. The activation fee for Surface Water Pro is $3,000 and $5,500 for Surface Water Pro Plus. The suggested retail price of iGrade is $500 for the application controller, plus a $4,000 activation fee. Max Cut allows users to set a series of sub-cuts needed to make large grade changes, a task that typically requires manual overrides, Hogrefe notes. John Deere added a new function called Max Cut to iGrade this summer to simplify ditch cleaning and other grading tasks. Now growers can reclaim ditches themselves using a lot of the precision technology they already own.” Many ditches have been left untouched for years. “In the Midwest, we are also seeing more people wanting to manage their ditches. ![]() “In Nebraska, Kansas and Colorado, we are seeing more demand for land leveling,” he says. Hogrefe confirms that recent wet springs have accelerated interest in harnessing existing on-farm GPS capabilities to improve drainage. When used with iGrade, the Pro Plus program’s sophisticated planning features complement more rudimentary iGrade drainage planning capabilities and automate the grading process, says Tyler Hogrefe, a senior technical product manager with John Deere Agricultural Management Solutions. They include iGrade, a controller and software package that automates land grading, ditching and other distance-based hydraulic commands, which Deere introduced in the fall of 2010.ĭeere also offers two software packages for generating ditches and levees: Surface Water Pro and Surface Water Pro Plus. John Deere offers three options for GPS-assisted grading and ditching using GreenStar 26 monitors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |